How to paint wooden furniture
How to paint wooden furniture
Most something may be remodeled with a will of paint and a few piecemeal directions. Here’s a simple, four-step tutorial on the way to paint wood furniture:
STEP 1: Sanding
The first order of business once painting a wood article of furniture is sanding. Don’t be tempted to skip this step. correct sanding can guarantee a good, swish end that's not vulnerable to breaking. I take advantage of Associate in Nursing orbital smoother, however different finishing sanders would work simply fine too.
(I wouldn’t extremely suggest hand-sanding unless you're terribly robust and really patient. It takes heaps of sanding to get rid of recent paint and stain, and that I would get terribly weary of sanding if I had to try and do it manually. I purchase bored with sanding even with the orbital sander!)
I sometimes begin out victimization 80- or 100-grit sandpaper, particularly if there’s a sturdy lacquer end on the piece.
Once most of the stain/paint has been removed, I switch to 150-grit or higher to get rid of any remaining end and free the surface.
Once I’ve sanded all over I will with the orbital smoother, I tackle hard-to-reach spots by hand with either a sanding block or a bit of plain sandpaper that I will bend and fold to achieve awkward areas. As long as you sand enough to get rid of the effulgence, the primer and paint ought to stick.
STEP 2: mud Removal
When you’ve finished sanding, it’s vital to get rid of all the mud, as residual mud won't solely break the new end, however, additionally keep the paint and primer from protrusive. I typically use a humid fabric, or typically a dry fabric followed by an intensive vacuuming.
STEP 3: Priming
Once your piece is sanded and dust-free, you’re progressing to got to prime it. I like better to use a sprig primer because it sometimes provides a neater, dilutant coat than a brush-on. Obviously, grey is best to use underneath dark paint colors, and white is best for lightweight colors.
When you prime, you wish to try and do many terribly skinny coats. In fact, after you do the primary coat, it ought to barely seem like you’ve even set. Let the primer dry for 10 minutes close to (depending on the weather and manufacturer recommendations), then do another coat. Let that coat dry before doing one or 2 a lot of. The goal is to own the piece fully lined in an exceedingly skinny, even coat of primer.
Depending on the wood kind, I typically sand before the last coat of primer goes on, because the primer will raise the grain of the wood. If the surface doesn’t feel swish to the bit, I run the orbital smoother gently across, victimization fine-grit sandpaper. I wipe it down once more, apply an extra coat of primer, and I’m finally able to paint.
STEP 4: Painting
My favorite paint for the wood article of furniture is Rust-Oleum Painter’s bit Semi-Gloss. This paint is dilutant than normal paint, that makes it easier to realize a swish end. Painter’s bit comes in many totally different sheens, however, I prefer to use the semi-gloss. (One will go unbelievably so much. simply to relinquish you a concept, the 2-1/4 cans I’ve used up to now have lined 2 dressers, 3 nightstands, a chair, a desk, and office furniture.)
Mix the paint well and employing a clean applier (I use a daily, barbellate brush, not a foam brush), coat a really skinny initial coat.
Just as with the primer, it’s vital to try and do a variety of skinny coats. I don’t suppose I will hyperbolize this: applying 5 skinny coats is far, far better than one thick coat. the skinny coats look higher, and that they are a lot of sturdy.
I have additionally found that once you’re painting an oversized, flat section (like the highest of a dresser), it’s best to use long strokes that cowl the whole length of the piece. this may facilitate to confirm a swish end with a good gloss.
This paint dries terribly quickly, therefore by the time you’ve to place a coat of paint on the whole piece of article of furniture (unless you’re painting in terribly wet conditions), the world you initially painted ought to be dry once more. If it’s not, wait 10 minutes close to, then apply another terribly skinny coat. Repeat this method until the article of furniture is painted to your satisfaction.
If you sand all the way down to the wood, square measure careful to use skinny coats of paint, and your piece of article of furniture is created of nice wood, then you ought to be able to prove a swish, sturdy end whereas still having the ability to examine some wood grain through the paint.
And if you’re something like American state, once you see what a massive distinction paint will create, you’ll begin wanting around for a lot of stuff to color.
